Skip to content

NUCLEO-H7S3L8

lbuild module: modm:board:nucleo-h7s3l8

Nucleo kit for STM32H7S3L8

The core is clocked at 600 MHz from the 24 MHz HSE crystal, the bus matrix at 300 MHz. The core is supplied by the LDO, configured in init_ldo.cpp before the RAM is initialized: with the direct SMPS supply the board locks up after the next power-on.

TinyUSB

The USB Type-C connector is connected to the OTG_HS port with the internal HS PHY, so you must configure TinyUSB to use the HS port:

<option name="modm:tinyusb:device:port">hs</option>

This module is only available for stm32h7.

Dependencies

modm:board:nucleo-h7s3l8 modm_board_nucleo_h7s3l8 modm: board: nucleo-h7s3l8 modm_architecture_clock modm: architecture: clock modm_board_nucleo_h7s3l8->modm_architecture_clock modm_debug modm: debug modm_board_nucleo_h7s3l8->modm_debug modm_platform_clock modm: platform: clock modm_board_nucleo_h7s3l8->modm_platform_clock modm_platform_core modm: platform: core modm_board_nucleo_h7s3l8->modm_platform_core modm_platform_gpio modm: platform: gpio modm_board_nucleo_h7s3l8->modm_platform_gpio modm_platform_i2c_1 modm: platform: i2c: 1 modm_board_nucleo_h7s3l8->modm_platform_i2c_1 modm_platform_spi_1 modm: platform: spi: 1 modm_board_nucleo_h7s3l8->modm_platform_spi_1 modm_platform_uart_3 modm: platform: uart: 3 modm_board_nucleo_h7s3l8->modm_platform_uart_3 modm_platform_usb_hs modm: platform: usb: hs modm_board_nucleo_h7s3l8->modm_platform_usb_hs

Limited availability: Check with 'lbuild discover' if this module is available for your target!