Skip to content

WeAct Studio STM32G0B1CB Core Board

lbuild module: modm:board:weact-g0b1cb

Documentation

Cheap and bread-board-friendly board for the STM32G0B1 series.

Programming

Since the board has no St-Link programmer on the board, you must use DFU (Device Firmware Update (via USB)) to program the board. A DFU command is integrated into the modm:build:scons tool:

scons program-dfu

This module is only available for stm32g0.

Dependencies

modm:board:weact-g0b1cb modm_board_weact_g0b1cb modm: board: weact-g0b1cb modm_architecture_clock modm: architecture: clock modm_board_weact_g0b1cb->modm_architecture_clock modm_platform_clock modm: platform: clock modm_board_weact_g0b1cb->modm_platform_clock modm_platform_core modm: platform: core modm_board_weact_g0b1cb->modm_platform_core modm_platform_gpio modm: platform: gpio modm_board_weact_g0b1cb->modm_platform_gpio modm_platform_usb modm: platform: usb modm_board_weact_g0b1cb->modm_platform_usb

Limited availability: Check with 'lbuild discover' if this module is available for your target!