Skip to content

Mini-F411

lbuild module: modm:board:mini-f411

STM32F411CEU "Mini-F411" Minimum System Development Board

Cheap and bread-board-friendly board for STM32F411 series. Sold for less than 5 USD on well known Internet shops from China. Attention: There are two variants: Mini-F411 and the cheaper Mini-F401.

Schematic

Programming

Since the board has no St-Link programmer on the board, you must use DFU (Device Firmware Update (via USB)) to program the board. A DFU command is integrated into the modm:build:scons tool and can be called as follows:

scons dfu

Alternatively you can go for an external programmer and specify which one you're using in a custom openocd.cfg file:

# Replace this with your custom programmer
source [find interface/stlink-v2.cfg]

Then include this file in your build options like so:

<library>
  <extends>modm:mini-f411</extends>
  <options>
    <option name="modm:build:openocd.cfg">openocd.cfg</option>
  </options>
</library>

This module is only available for stm32f411ceu7.

Dependencies

modm:board:mini-f411 modm_board_mini_f411 modm: board: mini-f411 modm_architecture_clock modm: architecture: clock modm_board_mini_f411->modm_architecture_clock modm_platform_clock modm: platform: clock modm_board_mini_f411->modm_platform_clock modm_platform_core modm: platform: core modm_board_mini_f411->modm_platform_core modm_platform_gpio modm: platform: gpio modm_board_mini_f411->modm_platform_gpio

Limited availability: Check with 'lbuild discover' if this module is available for your target!