STM32F401CCU "Mini-F401" Minimum System Development Board
Cheap and bread-board-friendly board for STM32F401 series. Sold for less than 4 USD on well known Internet shops from China. Attention: There are two variants: Mini-F411 and the cheaper Mini-F401.
Since the board has no St-Link programmer on the board,
you must use DFU (Device Firmware Update (via USB)) to program the board.
A DFU command is integrated into the
modm:build:scons tool and can be called as follows:
Alternatively you can go for an external programmer
and specify which one you're using in a custom
# Replace this with your custom programmer source [find interface/stlink-v2.cfg]
Then include this file in your build options like so:
<library> <extends>modm:mini-f401</extends> <options> <option name="modm:build:openocd.cfg">openocd.cfg</option> </options> </library>
This module is only available for stm32f401ccu6.
Limited availability: Check with 'lbuild discover' if this module is available for your target!